DGIS 170 ME
Industrial range three-phase, soundproof generator, operating in automatic mode, manual mode, signal mode, or test mode. A commitment to quality energy.
Power (PRP / ESP):
160 / 176 kVA (128 / 141 kW)
VERSION:
Soundproofed
VOLTAGE:
400/230V
EMISSIONS LEVEL: EU Stage II
CE DECLARATION OF CONFORMITY
Another version of this product
DGIS 170 ME
DGIS 170 ME
DGIS 170 ME
DGIS 170 ME
DGIS 170 ME
DGIS 170 ME
PRODUCT DETAILS
VERSION
Soundproofed
Fuel
Diesel
Voltage
400/230V
RPM
1500
Number of phases
3
L (mm)
3412
W (mm)
1162
H (mm)
1900
Weight (Kg)
2300
Engine make and model
IVECO N67 TM3A
Type of regulation
Mechanical
Refrigeration
Water-cooled
Emissions
EU Stage II
Consumption 50%
18 l/h
Consumption 75%
29 l/h
Consumption 100% PRP
29 l/h
Consumption 100% ESP
39 l/h
Tank size (l)
425 l
Autonomy 50% PRP
23,6 h
Autonomy 75% PRP
29 h
Autonomy 100% PRP
11,8 h
Autonomy 100% ESP
10,9 h
Alternator make and model
MECCALTE ECP34 2L4 C
Type of alternator regulation
DSR
Switch model
Schneider EasyPact 250A 4P
Amps ESP (A)
254
Make and model
DSE 6120 MKIII
DGIS 170 ME
Range Industrial
| 50Hz
Do you need an ATS for your installation?
CONTACTORS TRANSFER SWITCHES
Switching panels between mains and genset with Schneider Electric contactors and enclosure from the same manufacturer. With mechanical and electrical interlocking and switching management from the control panel. They have an optional mains failure detector.
REMOTELY OPERATED MOTORISED TRANSFER SWITCH (RTS)
Transfer switches with remote-operated 4-pole fully visible break. They allow in-load transfer of two three-phase sources via remote-voltage-free contacts, from an external automatic controller, using pulse logic or a switch.
They are designed for use in low-voltage power systems where a brief interruption of load power during transfer is acceptable.
Interested in learning more about this generator? Simply fill out the form below to receive all the details
* Remember to fill out all required fields
