Skip to main content

DGV 500 ST

Three-phase open generator set from our Industrial range, with an automatic, manual, by signal or test operating mode.

It includes a high-resistance galvanized steel bench and is specially designed for continuous power demands in various areas, such as industry, infrastructures, mining and Data Processing Centers.

DGV 500 ST
*Illustrative image
  • Dimensions (mm)
  • Weight (Kg)
  • Fuel tank (l)
  • Voltage
    400/230 V
  • Frequency
    50 Hz
  • 1500r.p.m
  • Water cooled
  • Fuel
  • Version
  • CE Conformity

Technical specifications

General technical data Engine VOLVO TAD1345GE-B
Alternator STAMFORD S4L1D-G
Performance class G3
Frequency 50 Hz
Voltage 400/230 V
Control card DSE 7320 MKII CONTROL CARD
Fuel tank (l) 963
Power ESP Power (kVA / KW) 500 / 400
PRP Power (kVA / KW) 450 / 360
Would you like more information? Technical datasheet or Request information }

Standard equipment


DSE 7320 MKII Deep Sea Electronics control card with mains grid monitor. The genset will automatically start up when detecting a fault in the electric power network and it will turn off automatically as well, when the electrical supply is re-established.

It can also work in manual mode and by signal. It allows you to monitor a wide range of generator parameters and display information alerts, status and alarms.

The module includes communication ports USB, RS232, RS485, and also DSENet® for system expansion. Possibility of Ethernet networking (plug).

The entire module is easily configurable via PC using the DSE specific software configuration.

It has 132x64" illuminated LCD display with 4 lines of text, 5-key navigation through menus, 9 configurable outputs and 8 configurable inputs, programmable clocks and alarms, reading and displaying parameter values, including RMS values.

Different operating modes are available: automatic mode, manual mode, signal mode and test

Other alternative configurations are available upon request to extend the capabilities of the operation modes.

DSE 7320 MKII Control Card for Dagartech gensets

Readings allowed by the control card

DSE 7320 MKII Control Card for Dagartech gensets
Turning speed
Engine Temperature
Oil pressure
Hours counter
Battery Voltage
Number of engine starts
Fuel level
Fuel consumption
Mains Voltage (L-N)
Mains Voltage (L-L)
Mains frequency
Generator Voltage (L-N)
Generator Voltage (L-L)
Generator frequency
Generator intensity
Power factor
Generator load (kW, kVA, kWh, kVAh)
Alarm detected
Start-up failure
Low oil pressure
Low coolant level
High/Low battery voltage
High/Low generator voltage
External emergency stop
Maintenance interval
High engine temperature
Low fuel level
Charging alternator failure
High/Low generator frequency
Over speed engine

The genset response to a fully configurable alarm is available via DSE 7320 software.

Would you like more information about the control card? Deep Sea Electronics DSE 7320 MKII technical datasheet

Other standard equipment

1500 water cooled Volvo engine

1500 water cooled Volvo engine

Complying EU Stage II emissions

Complying EU Stage II emissions

Central lifting beam

Central lifting beam

Hot and moving parts protection

Hot and moving parts protection

Emergency stop button

Emergency stop button

4-pole magnetothermic protection

4-pole magnetothermic protection

Would you like more information? Technical datasheet or Request information

¿Deseas información sobre nuestros grupos electrógenos?

Completa el siguiente formulario, estudiaremos tu caso y te ofreceremos la solución que mejor se adapte a tus necesidades.

Contact data

Información acerca del producto

Información técnica del producto

¿Conoces las especificaciones técnicas del grupo eléctrogeno que necesitas?

Tipo carcasa


Protection of personal data. We will use your data to send budgets and commercial communications. For more information about the treatment and your rights, consult the privacy policy.< /p>