Skip to main content

DGPS 25 MF ST

Single-phase soundproofed generator set from our Industrial range, with an automatic, manual, by signal or test operating mode.

It includes a high-resistance galvanized steel bench and canopy, and is specially designed for continuous power demands in various areas, such as industry, infrastructures, mining and Data Processing Centers.

DGPS 25 MF ST
*Illustrative image
  • Dimensions (mm)
    L
    2300
    W
    1042
    H
    1290
  • Weight (Kg)
    980
  • Fuel tank (l)
    143
  • Voltage
    230 V
  • Frequency
    50 Hz
  • 1500r.p.m
  • Water cooled
  • Fuel
    Diesel
  • Version
    Soundproofed
  • CE Conformity

Technical specifications

Diesel genset with Perkins engine and Stamford alternator.

This soundproofed generator set from the Industrial range includes:

Mechanical equipment

  • Generator set with an automatic start.
  • Electro-welded canopy made of high-strength galvanized steel, and painted with electrostatic powderbased epoxy-polyester paint.
    • Interior soundproofing with acustical and fireproof isolating rock wool.
    • Efficient residential exhaust for the evacuation of gases to the outside with rain cap.

      Tested in saline mist chamber according to the ASTM B-117-09 standard, 720h resistance. Mechanical protection degree IP44.

  • Electro-welded bench made of high-strength steel and painted with epoxy-polyester powder-based electrostatic paint. It also includes anti-vibration dampers.

    Tested in saline mist chamber according to the ASTM B-117-09, 500h resistance.

  • 143-litre fuel tank located on the bench.
  • Measuring gauge and a fuel installation to the engine.

Electrical equipment

  • Control panel

    • Protection devices and distribution with a Deep Sea Electronics control module: DSE 6020 MKII, which allows you to work in manual, automatic or signal mode.
    • Emergency stop button.
    • Deep Sea Electronics battery charger:DSE 9150 12V, 3A, designed to be permanently connected to the battery and maintain a 100% load. The charger remains in floating mode when charging is completed.
    • Protections:
      • 4-pole circuit breaker protection against overloads and short circuits.
      • Protection fuses for the control set.
    • Protection switch -Schneider EasyPact 125A 4P.

If you would like to know the complete scope of supply of this generator set, please download the following technical data sheet. Do you need more info? Do you have any doubts? Contact us.

General technical data Engine PERKINS 1103A-33G
Alternator STAMFORD S1L2-K 1ph
Performance class G2
Frequency 50 Hz
Voltage 230 V
Control card DSE 6020 MKII CONTROL CARD
Fuel tank (l) 143
Power ESP Power (kVA / KW) 25 / 25
PRP Power (kVA / KW) 23 / 23
Would you like more information? Technical datasheet or Request information }

Standard equipment

DSE 6020 MKII CONTROL CARD

DSE 6020 MKII control card, with mains grid monitor. The genset will automatically start up when detecting a fault in the electric power network and it will turn off automatically as well, when the electrical supply is re-established.

It can also work in manual mode and by signal. It allows you to monitor a wide range of generator parameters and display information alerts, status and alarms.

The module includes USB communication ports, 4 configurable digital inputs, 3 analog inputs, 6 configurable outputs, emergency stop button and 8-35 V battery charger.
 
It has 132x64p illuminated LCD display with 4 lines of text, 5-key navigation through menus, programmable clocks and alarms, reading and displaying parameter values, including RMS values.

The entire module is easily configurable via PC using the DSE specific software configuration.

Different operating modes are available: automatic mode, manual mode, signal mode and test mode.

Other alternative configurations are available upon request to extend the capabilities of the operation modes.

DSE 6020 MKII Control Card for Dagartech gensets

Readings allowed by the control card

DSE 6020 MKII Control Card for Dagartech gensets
Engine
Turning speed
Oil pressure
Battery voltage
Hours counter
Coolant temperature
Mains
Mains voltage (L-N)
Mains voltage (L-L)
Mains frequency
Generator
Voltage generator (L-N)
Voltage generator (L-L)
Generator frequency
Generator intensity
Power factor
Generator load (kW, kVA, kWh, kVAh)
Alarm detected
Start-up failure
High coolant temperature
Low oil pressure
High/Low speed engine
High/Low generator voltage
High/Low generator frequency
External emergency stop
Low fuel level
Overload
Charging alternator failure
Maintenance interval

The genset response to a fully configurable alarm is available via DSE 6020 software.

Would you like more information about the control card? Deep Sea Electronics DSE 6020 MKII technical datasheet

Other standard equipment

1500 water cooled Perkins engine

1500 water cooled Perkins engine

Complying EU Stage 0 emissions

Complying EU Stage 0 emissions

Electro-welded canopy made of high-strength galvanized steel

Electro-welded canopy made of high-strength galvanized steel

Central lifting beam

Central lifting beam

Emergency stop button

Emergency stop button

4-pole magnetothermic protection

4-pole magnetothermic protection

Would you like more information? Technical datasheet or Request information

¿Deseas información sobre nuestros grupos electrógenos?

Completa el siguiente formulario, estudiaremos tu caso y te ofreceremos la solución que mejor se adapte a tus necesidades.

Contact data

Información acerca del producto

Información técnica del producto

¿Conoces las especificaciones técnicas del grupo eléctrogeno que necesitas?

Tipo carcasa

Frecuencia