Skip to main content

DGP 8 MF ME

Single-phase open generator set from our Industrial range, with an automatic, manual, by signal or test operating mode.

It includes a high-resistance galvanized steel bench and is specially designed for continuous power demands in various areas, such as industry, infrastructures, mining and Data Processing Centers.

DGP 8 MF ME
*Illustrative image
  • Dimensions (mm)
    L
    1350
    W
    720
    H
    1200
  • Weight (Kg)
    550
  • Fuel tank (l)
    84
  • Voltage
    230 V
  • Frequency
    50 Hz
  • 1500r.p.m
  • Water cooled
  • Fuel
    Diesel
  • Version
    Open
  • CE Conformity

Technical specifications

Diesel genset with Perkins engine and Meccalte alternator.

This open generator set from the Industrial range includes:

Mechanical equipment

  • Generator set with an automatic start.
  • Electro-welded bench made of high-strength steel and painted with epoxy-polyester powder-based electrostatic paint. It also includes anti-vibration dampers.

    Tested in saline mist chamber according to the ASTM B-117-09, 500h resistance.

  • -11dB (A) industrial exhaust gas silencer.
  • 84-litre fuel tank located on the bench.
  • Measuring gauge and a fuel installation to the engine.

Electrical equipment

  • Control panel

    • Protection devices and distribution with a Deep Sea Electronics control module: DSE 6020 MKII, which allows you to work in manual, automatic or signal mode.
    • Emergency stop button.
    • Deep Sea Electronics battery charger:DSE 9150 12V, 3A, designed to be permanently connected to the battery and maintain a 100% load. The charger remains in floating mode when charging is completed.
    • Protections:
      • 4-pole circuit breaker protection against overloads and short circuits.
      • Protection fuses for the control set.
    • Protection switch -Schneider Acti 9 40A 4P.

If you would like to know the complete scope of supply of this generator set, please download the following technical data sheet. Do you need more info? Do you have any doubts? Contact us.

General technical data Engine PERKINS 403A-11G1
Alternator MECCALTE ECP28-S/4 1ph
Performance class G2
Frequency 50 Hz
Voltage 230 V
Control card DSE 6020 MKII CONTROL CARD
Fuel tank (l) 84
Power ESP Power (kVA / KW) 9 / 9
PRP Power (kVA / KW) 8 / 8
Would you like more information? Technical datasheet or Request information }

Standard equipment

DSE 6020 MKII CONTROL CARD

DSE 6020 MKII control card, with mains grid monitor. The genset will automatically start up when detecting a fault in the electric power network and it will turn off automatically as well, when the electrical supply is re-established.

It can also work in manual mode and by signal. It allows you to monitor a wide range of generator parameters and display information alerts, status and alarms.

The module includes USB communication ports, 4 configurable digital inputs, 3 analog inputs, 6 configurable outputs, emergency stop button and 8-35 V battery charger.
 
It has 132x64p illuminated LCD display with 4 lines of text, 5-key navigation through menus, programmable clocks and alarms, reading and displaying parameter values, including RMS values.

The entire module is easily configurable via PC using the DSE specific software configuration.

Different operating modes are available: automatic mode, manual mode, signal mode and test mode.

Other alternative configurations are available upon request to extend the capabilities of the operation modes.

DSE 6020 MKII Control Card for Dagartech gensets

Readings allowed by the control card

DSE 6020 MKII Control Card for Dagartech gensets
Engine
Turning speed
Oil pressure
Battery voltage
Hours counter
Coolant temperature
Mains
Mains voltage (L-N)
Mains voltage (L-L)
Mains frequency
Generator
Voltage generator (L-N)
Voltage generator (L-L)
Generator frequency
Generator intensity
Power factor
Generator load (kW, kVA, kWh, kVAh)
Alarm detected
Start-up failure
High coolant temperature
Low oil pressure
High/Low speed engine
High/Low generator voltage
High/Low generator frequency
External emergency stop
Low fuel level
Overload
Charging alternator failure
Maintenance interval

The genset response to a fully configurable alarm is available via DSE 6020 software.

Would you like more information about the control card? Deep Sea Electronics DSE 6020 MKII technical datasheet

Other standard equipment

1500 water cooled Perkins engine

1500 water cooled Perkins engine

Complying EU Stage 0 emissions

Complying EU Stage 0 emissions

It does not include a center lifting beam (available as an option)

It does not include a center lifting beam (available as an option)

Hot and moving parts protection

Hot and moving parts protection

Emergency stop button

Emergency stop button

4-pole magnetothermic protection

4-pole magnetothermic protection

Optional equipment

This generator set from our open Industrial Range includes the following optional equipment:

Electrical options

  • ATS contactors.
  • Remotely operated ATS.
  • Earth Leakage protection.

Engine - alternator options

  • Electronic governor (for models with mechanical regulation)..
  • Fuel prefilter with water separator
  • Oil sump pump.
  • 6-way valve kit with quick connectors.
  • Automatic fuel system:
    • Electric pump included.
    • Electric pump not included.
  • -35dB(A) exhaust.
  • Exhaust installation kit (2 clamps + 3m flexible hose).
  • Anti-condensation heaters.
  • Alternator impregnation systems 3 (spray) & 4 (superior).
  • AVR MX341 + PMG ± 1% STAMFORD.
  • AVR MX321 + PMG ± 0,5% STAMFORD.

Mechanical options

  • Retention bath (the model undergoes dimensional changes).
  • Sensor on retention bund warning when spillage (retention bath is required).
  • 24-hour authonomy fuel tank with retention bath.
  • 48-hour authonomy fuel tank with retention bath.
  • Roth Duo System external fuel tanks with different capacities (400 to 1500-litre capacity).
  • Leveling machine mounts.
  • Spring isolators.
  • Automatic fuel system.
  • Central lifting beam (models

Options de communication

  • Module DSE 7320 MKII (modèles équipés du module DSE 6020 MKII).
  • DSE 2130 8 entrées (DSE 7320MKII nécessaire).
  • DSE 2157 8 sorties libres (DSE 7320MKII nécessaire).
  • DSE 2548 8 diodes led signal(DSE 7320MKII nécessaire).
  • DSE 855.
  • DSE 890 Webnet.
  • Kit synchro DSE 8610 (MINT Auto Start).
  • Kit synchro DSE 8620 (SPtM).
    • Remarque sur l'étendue de la livraison des kits de synchronisation:
        Le Kit Synchro DSE 8610 (MINT Auto Start) inclut:
        • Carte de contrôle DSE 8610.
        • Régulation électronique du moteur.
        • PMG.
        • Interrupteur motorisé.
        • Contacteur de terre.
        • Testing.
        Le Kit Synchro DSE 8620 (SpTM) inclut:
        • Carte de contrôle DSE 8620.
        • Régulation électronique du moteur.
        • PMG.
        • Testing.

Vous ne trouvez pas ce que vous cherchez? A-vous des doutes? Contactez-nous, nous pouvons vous aider.

Would you like more information? Technical datasheet or Request information

¿Deseas información sobre nuestros grupos electrógenos?

Completa el siguiente formulario, estudiaremos tu caso y te ofreceremos la solución que mejor se adapte a tus necesidades.

Contact data

Información acerca del producto

Información técnica del producto

¿Conoces las especificaciones técnicas del grupo eléctrogeno que necesitas?

Tipo carcasa

Frecuencia