Skip to main content

DGB 170 ST

Three-phase open generator set from our Industrial range, with an automatic, manual, by signal or test operating mode.

It includes a high-resistance galvanized steel bench and is specially designed for continuous power demands in various areas, such as industry, infrastructures, mining and Data Processing Centers.

DGB 170 ST
*Illustrative image
  • Dimensions (mm)
    L
    2600
    W
    1000
    H
    1900
  • Weight (Kg)
    1750
  • Fuel tank (l)
    430
  • Voltage
    400/230 V
  • Frequency
    50 Hz
  • 1500r.p.m
  • Water cooled
  • Fuel
    Diesel
  • Version
    Open
  • CE Conformity

Technical specifications

General technical data Engine BAUDOUIN 6M11G4D0/S
Alternator STAMFORD UCI274F
Performance class G3
Frequency 50 Hz
Voltage 400/230 V
Control card DSE 6020 MKII CONTROL CARD
Fuel tank (l) 430
Power ESP Power (kVA / KW) 175 / 140
PRP Power (kVA / KW) 154 / 124
Would you like more information? Technical datasheet or Request information }

Standard equipment

DSE 6020 MKII CONTROL CARD

DSE 6020 MKII control card, with mains grid monitor. The genset will automatically start up when detecting a fault in the electric power network and it will turn off automatically as well, when the electrical supply is re-established.

It can also work in manual mode and by signal. It allows you to monitor a wide range of generator parameters and display information alerts, status and alarms.

The module includes USB communication ports, 4 configurable digital inputs, 3 analog inputs, 6 configurable outputs, emergency stop button and 8-35 V battery charger.
 
It has 132x64p illuminated LCD display with 4 lines of text, 5-key navigation through menus, programmable clocks and alarms, reading and displaying parameter values, including RMS values.

The entire module is easily configurable via PC using the DSE specific software configuration.

Different operating modes are available: automatic mode, manual mode, signal mode and test mode.

Other alternative configurations are available upon request to extend the capabilities of the operation modes.

DSE 6020 MKII Control Card for Dagartech gensets

Readings allowed by the control card

DSE 6020 MKII Control Card for Dagartech gensets
Engine
Turning speed
Oil pressure
Battery voltage
Hours counter
Coolant temperature
Mains
Mains voltage (L-N)
Mains voltage (L-L)
Mains frequency
Generator
Voltage generator (L-N)
Voltage generator (L-L)
Generator frequency
Generator intensity
Power factor
Generator load (kW, kVA, kWh, kVAh)
Alarm detected
Start-up failure
High coolant temperature
Low oil pressure
High/Low speed engine
High/Low generator voltage
High/Low generator frequency
External emergency stop
Low fuel level
Overload
Charging alternator failure
Maintenance interval

The genset response to a fully configurable alarm is available via DSE 6020 software.

Would you like more information about the control card? Deep Sea Electronics DSE 6020 MKII technical datasheet

Other standard equipment

1500 water cooled Baudouin engine

1500 water cooled Baudouin engine

Complying EU Stage 0 emissions

Complying EU Stage 0 emissions

Central lifting beam

Central lifting beam

Hot and moving parts protection

Hot and moving parts protection

Emergency stop button

Emergency stop button

4-pole magnetothermic protection

4-pole magnetothermic protection

Would you like more information? Technical datasheet or Request information

¿Deseas información sobre nuestros grupos electrógenos?

Completa el siguiente formulario, estudiaremos tu caso y te ofreceremos la solución que mejor se adapte a tus necesidades.

Contact data

Información acerca del producto

Información técnica del producto

¿Conoces las especificaciones técnicas del grupo eléctrogeno que necesitas?

Tipo carcasa

Frecuencia

Protection of personal data. We will use your data to send budgets and commercial communications. For more information about the treatment and your rights, consult the privacy policy.< /p>